NEW USED PARTS ORDERING PAYMENT SHIPPING WARRANTY RETURNS
TECH RESOURCES GALLERY WANTED LINKS NEWS EBAY FAKES
HOME NAMM FEEDBACK TESTIMONIALS CONTACT EMAIL
ZR1 - The arm holder has a cap with busing underneath, and the base of the holder is On the back side of the trem, the end of the arm holder is a threaded hole that the bar threads into. The holder cap only provides tension on the bushing. [always remember the bushing goes in with the tab down]
Identifying is easy, if there is a cap with "tabbed" bushing that fits into a slot in the top of the holder, you have a ZR1
ZR2 - Usually Prestige and Premium only, arm holder is a machined tube with a the end of the arm holder is a screw, holder on a spring/holder/attachment, using a bar that clicks in. The holder cap only provides tension on the bushing.
If you have the cap, tabbed bushing, and slotted holder that screws into the baseplate, and the base of the holder is a 12mm "bolt", you have a ZR2.
V1.1 - replaced the cast discontinued and failure prone 2ZR29 holder on the ZR1, and the end of the holder is an Allen head bolt that clamps the holder cover to the holder socket, and uses a bar with a screw on collar mounted on the bar.