NEW   USED   PARTS   ORDERING   PAYMENT   SHIPPING   WARRANTY   RETURNS

TECH   RESOURCES   GALLERY   WANTED   LINKS   NEWS   EBAY   FAKES

HOME   NAMM   FEEDBACK   TESTIMONIALS   CONTACT   EMAIL

How to Reset You Combo Lock

Typed verbatum from Ibanez instruction card that comes in every new UV1000 case.

Set your combination

1. Choose 3 digits you can recall easily - address, phone, birthday etc.

2. Press the button in a direction toward the dial with your thumb and hold with your other hand (Use point of ball pen) rotate the dials to the desired setting. Then, release the button.

3. Your lock is now set to open on the three digits engaged at the time you release the button.

CAUTION

4. Accordingly - NEVER rotate the dials with the button held open UNLESS you make careful note of the dial setting upon release of the button.

5. The manufacturer is not responsible for damage resulting from misuse, abusive handling, or failure to follow instructions.

Remove the red arrow before setting lock.

* Please Note:

Make sure to cut down the red plastic pin before operation.

Copyright 2000 Ibanez Rules!! All rights reserved.
Revised: June 24, 2009.